Accuair Endo-CVT – Wiring and Tank install – Dodge Challenger Scat Pack

 

Getting started with the Accuair Endo-CVT tank installation and wiring. In this video I go over what holes in the tank to plug, What locktite to use and review the wiring. I also give you guys the first listen to how quiet the Endo-CVT is.

 

What is the Endo-CVT?

INTERNAL WABCO COMPRESSOR – The internal WABCO compressor refills the tank with completely dry air at a rate twice as fast as the current market standard compressor.

DIGITAL INTELLIGENCE – Internal ECU monitors tank pressure, compressor head temperature, and ambient moisture levels to optimize compressor operation, provide maximum duty cycle, as well as regenerate the built-in desiccant air dryer as required.

SILENT OPERATION – Near silent operation due to a patent pending primary and secondary isolation system that softly suspends the compressor inside the tank body.

VALVE-INTEGRATED TANK CAPS – Includes the solenoid valves and air tank all in one easy to mount package

ADJUSTABLE FLOW CONTROL – Built-in VFC™ (variable flow control) adjusters allow for end user adjustment of the speed of each corner and each direction individually.

FILTERED PORTS – FFPT (fully-filtered-push-to-connect) air fittings eliminate the risk of debris-induced valve problems common with all other solenoid valves on the market.

BOLTED CONSTRUCTION – Modular and bolted construction makes disassembly possible for maintenance and upgrades.

DOT RATED AND TESTED – The only DOT Approved Aluminum air tank for air suspension. Certified to 200 psi and tested to an incredible 1324 psi burst pressure.

Stuff you saw in this video 

(amazon affiliate links will get you to the tools I use and you pay the same low price while Amazon gives me a small bounty to help fund my videos)

 

 

Red Edge Seat belts from
http://www.seatbeltplanet.com

Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

Dodge Challenger Parking Brake Adjustment – Emergency Brake

 

Having a manual car with a parking brake that slips is no fun. In this video we go over adjusting the parking brake. Total job takes about an hour from Start to finish and is low difficulty.

This video can be used for Challengers, Chargers and I believe 300s as well.

 

Stuff you saw in this video 

(amazon affiliate links will get you to the tools I use and you pay the same low price while Amazon gives me a small bounty to help fund my videos)

 

Red Edge Seat belts from
http://www.seatbeltplanet.com

 

Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

Challenger Passenger headlight Intake – Ram Air x3 with Spectre 3″ Tube

 

 

You guys were right opening up the passenger headlight intake did bring in some unwanted dust and water into the engine bay.  I fixed the issue with a $15 part.

 

Routing the air into the front of the engine and the water down and out through the maintenance pan using the Spectre Performance 8741 Black 3″ Air Duct Hose

 

Headlight Rings from Merrick Motorsports – Get some!
Discount Code “WORKPLAYDRIVE” ($5.00 off your order)

 

Stuff you saw in this video 

(Amazon Affiliate Links)

Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

Dodge Challenger Rear Deck Rattle Fixed

 

The rear deck rattle has been an issues since I picked up the car in 2015. The fix will take about 3 hours to complete and is totally worth the effort. No longer having to listen to the blown speaker sound created by the deck vibration is priceless.
Click here for the video that shows you step by step on how to access the rear deck  In this video I detail how to completely remove the back seat area of my 2015 Dodge Challenger. Removing seats, interior Trim and the rear deck to install my new custom seat belts from Seatbeltplanet.com.

 

 

 

Stuff you saw in this video 

(Amazon Affiliate Links)

 

Red Edge Seat belts from – http://www.seatbeltplanet.com

 

Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

Watch before you buy the Ikon Motorsports Challenger Rear Diffuser!

 

I was so excited to see the Ikon Motorsports Challenger rear Diffuser finally available! I ordered it right away and was pretty disappointed when it arrived. It’s not ALL bad, but there are a few things you need to consider before buying.

This is an unpainted piece, while it’s black like your trim and some wouldn’t mind the imperfections in the finish, I feel it’s meant to be prepped and Painted. I’m also not willing to delete my backup sensors.

I’ll go over my issues with the product and why I’m sending it back in hopes they they address some of the issues that make it not worthy for the WorkPlayDrive Challenger.
Stuff you saw in this video

If you still want to buy one…

Red Edge Seat belts from – http://www.seatbeltplanet.com

Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

Disassembly of 2015+ Challenger Rear Interior and Install of SeatbeltPlanet.com custom Seat Belts

 

In this video I detail how to completely remove the back seat area of my 2015 Dodge Challenger. Removing seats, interior Trim and the rear deck to install my new custom seat belts from Seatbeltplanet.com.

This video can be used as an instructional video if you need to access all the rear speakers, run wiring or simply remove the seats for weight reduction.

 

Table of Contents

00:01 – About This Video
03:15 – Tools needed
03:48 – 2015+ Challenger Rear Seat Removal
06:45 – Quick discussion on progress
08:31 – 2015+ Challenger Rear Armrest Trim removal
11:26 – 2015+ Challenger tweeter disconnect
11:55 – 2015+ Challenger Rear C Pillar Trim removal
15:29 – 2015+ Challenger close up of C Pillar trim straps for Air Bag
17:01 – 2015+ Challenger Rear Deck removal
18:15 – 2015+ Challenger Rear Deck seat belt removal
19:06 – 2015+ Challenger Rear Side seat belt removal
21:07 – 2015+ Challenger Rear Seat belt Install new redline belts from SeatbeltPlanet.com
24:19 – 2015+ Challenger Rear seat area reassembly
38:03 – Finished product

Stuff you saw in this video 

(Amazon Affiliate Links)

 

Red Edge Seat belts from
http://www.seatbeltplanet.com

 

Recording Gear

Advanced Audio setup

 

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

 

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

Merrick Motorsports Headlight Intake Rings – Install and First Impressions

Update: Merrick Motorsports Discount CodeWORKPLAYDRIVE” ($5.00 off your order)

 

Installing the set of Merrick Motorsports 2015-2019 Anodized Challenger Intake Headlight Rings I picked these up during their $5 off sale last week. I’m impressed with the quality and ease of install, my only regret is waiting so long to buy them.  These are for the 2015+ Challengers and in most cases can be installed in under 15 minutes (a little longer if you have Mopar hood pins).

 

Stuff in this video

Merrick Motorsports Orange Anodized 2015+ Challenger Intake Headlight Ring – Buy from here Merrick Motorsports

No discount at this time, but follow my Instagram @WorkPlayDrive for when one becomes available.

 

 

(Amazon Affiliate Links)

Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

zAutomotive Tazer – Speedometer Adjustment Tires with a Larger Sidewall Atturo AZ850 275/45/20

Larger sidewall? speedometer off? No Problem! The latest firmware on the zAutomotive Tazer allows you to easily adjust for changes in tire circumference. It takes about 10 minutes using the Tire calculator and the zAutomotive TaZer running the latest firmware and married to your vehicle.

If you want to help out the channel please use one of our affiliate links below.

I get all my tires from S&M Performance  – Great prices and FREE Shipping on the tires

  • Fronts are Atturo AZ850 275/40/20 (same circumference as stock 245/45/20)
  • Rears are Atturo AZ850 275/45/20 (14MM taller than the factory tires)

Stuff in this video (affiliate links)

(Amazon Affiliate Links)

Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

Bye Bye NoWeeds – Broke my exhaust on the Chrysler Nationals show field

 

I had an awesome time at Chrysler Nationals, however leaving the show field’s uneven grass and gravel surfaces something grabbed my actuator, sheared the pin and broke the passenger side system.

This video will show the last performance of my NoWeeds that Friday the 13th, the moments after I noticed the damage and how I plan to fix it.

I also show the process where I remove the NoWeeds system and reinstall the stock pipe I cut out in under 30 minutes. The system is on the way to NoWeeds for repair.

 

NoWeeds Diverter
The NoWeeds system will cut off your factory exhaust and send the flow out the turndowns.  Click to Purchase the NoWeeds Scat Pack Kit

** No discounts on the NoWeeds at this time, but they are WorkPlayDrive Approved!

 

 

Stuff in this video (Amazon Affiliate Links)

 

Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/