Testing the Autowit SuperCap 2 on my brother in law’s jeep. His car has a charging system issue, and his battery is always dead. As you can see, it was at 8.2 volts when we started. The Autowit SuperCap 2 took 5 minutes to charge from the 8.2-volt battery fully, and it started the car without a struggle.
A lighting controller is more on the expensive side, but it eliminates the hassle of wiring up relays fuses and with a wireless controller you don’t have to pass wiring through the firewall for switches.
I picked up the Trigger 4 Plus which allows for a total of 4 lights 2 at 10 amps and 2 at 30 amps. the switch pod is wireless so you can cary it in your pocket and mount it in the cab with a magnetic base. If you need more lighting you can group multile trigger controllers together or grab the Trigger six shooter
The brackets are from zRoadz and these Zroadz ditch light Brackets are specially made for the 2019-2021 Ram 1500 Rebel . For my ditch lighting I used the Auxbeam 4″ amber pod lights which do a very good job lighting up to roadside and the Amber color provides less reflection in dusty, foggy and snowy situations.
I’ve been staring at the Spoilerking Rear window spoiler since my buddy Ryan over at Hemifam installed one on the old hag. I received a partial sponsorship for this so I figured it was time to go for it. I still paid well over $100 for this item, but the discount really helped. The spoiler featured in this vide is the Spoiler XL w/ Center Cut (380RC)
I installed the Luxe Forged Carbon Chopped Metallic vinyl in my dashboard and center console trim to compliment my new Forged Carbon Steering wheel. Each piece took just over an hour to wrap and the results were amazing.
Originally I wrapped it and left the silver trim ring around the edges and I was not happy with the results. You can see photos in the video at 0:19 so I peeled it off and wrapped the entire trim piece.
This is not an instructional video, but I do offer a few tips and as requested I show the entire wrap process for both pieces. Be sure to check out the Awesome Color Matched Paddle Shifters from CCH Customs and my new Forged Carbon Steering Wheel.
We’ve worked with Scalia-Motorsports many times in the past and while their new Shaker riser doesn’t fit on my hellcat, I really felt we needed to do a video on it. This kit raises the height of your Challenger Shaker Scoop by 3/4” giving it a more aggressive look. The kit comes with everything you need to install in about 20 minutes.
Grab your Shaker Riser Kit 10% off Discount code MOJO RISING good through 4/1/2021 5% off Discount code – WorkPlayDrive5
Our Kit contained
1ea New lower profile Shaker seal
5ea magnetic spacers and applicable bolts, standoffs and nuts depending on your install (5.7L or 6.5L)
Only one kit required per vehicle; comes with parts to emulate BOTH exhaust valves.
If you want to remove the active exhaust valves on your Dodge or Chrysler vehicle, you need a valve simulator to prevent the Check-Engine light and diagnostic trouble codes.
Here is the simplest, fully electronic solution! Other options on the market are purely mechanical; require re-using the valves and mounting them to a dummy plate.
1: Crawl under vehicle and unplug both active exhaust valves.
2: Plug in the Inactive Exhaust modules. Secure in place with a zip-tie.
3: That’s it! You can leave the valves in place if you have a stock system and just want the valves open all the time. Or you can remove them completely – even sell them!
Great for those that:
just want the valves open full-time
want to remove or disable “noisy valves” as it is common for them to rattle
have faulty valves and don’t want the expense of replacing them
installing aftermarket exhaust and are completely removing the valves
This kit contains two parts – one is the inactive exhaust module, with an automotive-grade microprocessor that communicates with the vehicle to make it think that the valves are installed and functioning properly. The other part is a dummy waterproof connector to keep the second valve’s plug from corrosion.
Works on all systems used in Chargers, Challengers and 300’s from 2015 to present.
The Zenfox T3 is a great option especially for taxi and uber drivers, or anyone looking for all-around coverage on the road. Offering coverage of the front, interior and rear of your vehicle, the Zenfox T3 provides clear images for accidents, attempted theft and other accidents. The front and rear camera offer a combined 300° field of view. Infrared lights are included so you can see what’s happening in the passenger cabin even at night.
The front camera is fitted with a 5MP Sony STARVIS IMX335 image sensor to offer you clear 2K QHD videos of the road ahead day and night. The camera view angle is 160-degrees, allowing it to capture a broader footage with fewer blind spots.
The camera can also be tilted in four directions for a better angle that best fits your need and the shape of your vehicle.
The T3 offers multiple bitrate options and uses the latest H.265 video recording codec for maximum quality, with H.264 as an option.
Also mounted on the main (front) camera is the interior IR camera that captures the activities inside your vehicle.
The interior IR camera is designed with rideshare drivers and vloggers in mind. The camera uses a Sony STARVIS IMX307 image sensor that is capable of recording in 1080p Full HD and can retain its picture quality even in grayscale.
The Zenfox T3 comes with a built-in GPS that you can use to record your speed and route data in your video footage files. The GPS will also synchronize the T3’s internal clock with the GPS time so that your video files can be correctly time-stamped.
Did you know that your footage with speed and location information can be used a defense if you believe you received the ticket in error or need evidence to dispute wrongful claims.
The Zenfox T3’s built-in Dual Band WiFI lets you connect with the Zenfox mobile app to control dash cams settings on the spot. The mobile app also lets you watch a Live View of any or all the three cameras all at once. You can also download recorded videos directly from the camera to your phone without having to remove the SD card inside.
This video is NOT SPONSORED – All products purchased on amazon at full retail price.
I love the Demonic Red Laguna leather seats in my 2018 Dodge Challenger Hellcat Widebody. Every six months, I clean and condition them using Chemical Guys Leather Cleaner, followed by their Leather Conditioner, and topped off with the Chemical Guys Leather Conditioner.
It leaves the seats clean, soft, protected from harmful UV rays, and the conditioning helps prevent the seats from cracking and fading. Not to mention the incredible smell of new leather every time you get in.