Category: YouTube

Modding a Brand New Hellcat Redeye – AAD Performance Harness Bar & Suspension

 

Who takes a Challenger Hellcat Redeye less than 24 hours old, with under 100 miles on the clock and stacks on some major mods?

John Burleson does…
Instagram @burleson

In this video we meet with Paker and Zach from AAD Performance  and they install:

 

 

So many goodies on such a new car. These parts are specifically designed for precise adjust-ability using their unique Tab system. Easily swap your camber adjustment for street and track in minutes as part of your tire swap routine. Check out the video for more details.

Why buy the real parts from AAD?  #BecauseOriginal (Read Me)

From AAD Performance

Full billet aluminum, fully-adjustable Front Upper Control Arms for your 2WD Charger, Challenger, Magnum, 300, Hellcat, etc. These Arms use our unique tab-lock system to facilitate easy, on-vehicle Camber adjustment so that when you lower your ride, you can get your Front Camber back in spec. We also use more rigid inboard bushings (90A polyurethane) or our new Patent Pending Spheriflex teflon impregnated Delrin spherical bushings to reduce or eliminate the slop in the OEM parts.

Our parts are all precision machined from 6061-T6511 billet aluminum and alloy steel. Tabs are laser-cut for exact fit and all hardware is high-strength with OEM-quality plating to resist corrosion. Our arms weigh approximately 1 pound less than the OEM parts (each) but are significantly stronger in all directions.

We use a high-end, FK stainless-steel, Teflon-lined spherical bearing for the joint that is angled 5-degrees to prevent joint bind at full droop. This bearing is replaceable and will last for years without issue.

In short, we have done everything we can to make sure these parts fit exactly right, provide all the adjustment you could need (up to +/- 8mm as compared to stock) and give nothing but trouble-free years of service even under harsh conditions.

 

Stuff you saw in this video

(amazon affiliate links will get you to the tools I use and you pay the same low price while Amazon gives me a small bounty to help fund my videos)

Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

 

2015+ Challenger 2015 Challenger 2016 Challenger 2017 Challenger 2018 Challenger 2019 Challenger Challenger Hellcat Challenger SXT Challenger T/A  Challenger Scat Pack Challenger Hellcat Hellcat Redeye

ZL1 Addons Challenger Widebody Front Chin Spoiler / Splitter Guards

The Challenger’s chin spoiler or front splitter has been known to take a beating from curbs and driveway entrances. Mine had some road rash from the previous owner, but once cleaned up I plan to protect it for years to come.

I didn’t even know this existed until I started ordering ZL1 Addons parts for my new Widebody Hellcat, these popped up in the list and I knew I needed to have it.  The kit consists of 3 thick HDPE pieces contoured to the chin spoiler, they bolt in replacing the factory push clips. Then custom metal washers screw into HDPE, these take the beating protecting your chin spoiler.

Another, great product ZL1!!!

Discount Code “Workplaydrive

From The ZL1 Site

These custom made splitter washers are for the Dodge Challenger SRT Demon and Widebody offering. This setup comes in a 3 piece layout that includes all mounting hardware and splitter protectors. MADE IN USA
This product protects your splitter from rubbing the bottom off when going through dips or up hills.
Note: THESE WILL NOT WORK WITH ANY OF OUR SPLITTER EXTENSIONS!!

 

Stuff you saw in this video

(amazon affiliate links will get you to the tools I use and you pay the same low price while Amazon gives me a small bounty to help fund my videos)

Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

She’s not a Shaker Scat Pack anymore…

 

Sad day today… I pulled the Cervinis Shaker kit off my Scat Pack as part of the month long process of returning her to stock. With the Shaker kit removed and the Billet Technology bling transferred to the Hellcat this looks nothing like my car.

The Cervinis Challenger Shaker Hood kit came with everything I needed to convert my Stock Challenger to a Shaker. The Cervini’s Kit is slightly larger and more aggressive looking than the OEM Mopar Shaker. This was my main reason for selecting Cervinis.

I chose the matte finish for the shaker and it held up very well ove the 3 years it was installed, the finish looks as good as the day I bought it. The hood was prepped and painted Pitch Black by Cervinis and they nailed the color match very well.

I will truly miss this mod…

I feel the Cervinis is much better than the stock shaker option. Why better you ask? Cervinis offers a perfect seal between the hood and the shaker outlet allowing NO HOT ENGINE AIR into the airbox. This coupled with the mopar intake tube  allowing ram air from the headlight and you have an amazing cold air intake setup with an aggressive hood to match. If you are interested in seeing more info about the Cervinis kit and why I ordered it check out Cervinis Challenger Shaker kit Part 1

You can get the Sto-N-Sho at the following sites

Stuff you Saw in this video

WorkPlayDrive Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

2015+ Challenger 2015 Challenger 2016 Challenger 2017 Challenger 2018 Challenger 2019 Challenger Challenger Hellcat Challenger SXT Challenger T/A  Challenger Scat Pack Challenger Hellcat No Drill License Plate Mount

Scat Pack Mods for Sale

Fastys-9386
Fasty’s Garage Lit Inlet tubes
with IP68 and Turn signal Scat Pack bee
Bought New $484.98
Selling these for $375.00 $10 shipping insured (If it’s over I’ll cover the rest of the shipping costs)

 

Full Air Suspension
  • SOLD Accuair air management Total I paid before Tax $3194.00I will sell for $2750.00 (Details Below)
  • Universal Air Aero 2 kit (Bags and adjustable struts), If you want my suspension as well I paid $1874.00 I will take  I will sell for $1400.00 (Details Below)
SOLD  Accuair Endo-CVT tank is brand new, it was replaced due to a valve issue and installed in February.
All plugs and the drain have been installed with Loctite 565 and cured for 5 hours at 90 degrees before pressurizing.  It’s mounted to a board with the eLevel components and iLevel, the wiring harness has already been re-pinned per the instructions to support the Endo-CVT.  All wiring is FULL LENGTH I did not cut the power and ground wires.  I can hand it over already
mounted to the board. https://youtu.be/jR2ddhK5lpc
SOLD Accuair Endo-CVT in Black Cerekote

SOLD SKU: AA-ENDO-CVT45-BC

SOLD $1,649.00 – what I paid

 

e-Level controller with touchpad in Black Cerekote
All sensors and sensor wiring harness brand new and not installed, with all screws included in unopened packaging.
  • $1,195.00 – what I paid

 

 

iLevel WiFi Receiver

  • $350.00 – what I paid

 

You will only need to buy DOT approved 3/8 airbrake line to connect to your bags which is inexpensive..

 

Suspension Bags and Struts

My suspension kit is the Universal Air Aero 2 kit, If you want my suspension as well I paid $1874. I will take  $1400.00 for the bags, struts and 3/8 fittings.  I will confirm with universal that the warranty is transferable.

 

 

 

 

 

 

SOLD Cervinis Shaker with Mopar Hood Pins  (Local Pickup only NJ)Hellcat-9453
SOLD Bought NEW Mopar Hood Pins $295.00
SOLD Bought NEW Full Cervinis Shaker Kit, with Intake Painted Pitch Black $1,950.00
SOLD Selling all for $1,250.00
 

 

 

Dodge Charger Widebody – Spring Festival #SF14 Footage – 1 Hour of Awesome cars

 

#SF14 was insane!

 

In the opening of the video you can see the new Charger Widebody concept which is masked with a geometric wrap to hide the shape, but you can still get a good view of the design. Sporting 20 x 11” wheels that look similar to the Daytona wheels wrapped in 305/35/20 tires. You can see quite a few other design changes in this version of the car.  These changes  include Fender Flairs (obviously) with the side markers molded in.   The front features a jeep SRT / Durango style slot above the bumper shortening the upper grill then below the bumper you will find much larger fog Light area vents.  In the rear there are some subtle changes to the vents and you will see the spoiler has been extended quite nicely.

 

I’m not sure what to think, I would have loved to see it in a solid color to better understand the design… Time till tell if this will make the jump to a production car in 2020.

 

Due to the music played at the event most of the audio needed to be replaced with non-copyright music, all the tracks be found below for your enjoyment.   We do cut in and out with live audio at time.  In the next week or so I will be posting more video from the days leading up to the event, including the disassembly of a few hour old Hellcat Redeye to modify to for the event.

 

Want your car to look this awesome contact modfx
Website
phone: 281.310.0663
email: sales@modfxcustoms.com
Instagram 

 

WorkPlayDrive Recording Gear

 

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

2015+ Challenger 2015 Challenger 2016 Challenger 2017 Challenger 2018 Challenger 2019 Challenger Challenger Hellcat Challenger SXT Challenger T/A  Challenger Scat Pack Challenger Hellcat ZL1 Addons Read Diffuser ZL1 Addons Discount Code = Workplaydrive car show

Scat Pack Disassembly – My thought on ZL1 Addons products and MFER-1

In this video I share my thoughts on both the ZL1 Addons and MFER-1 products after using them on the Scat Pack for a few months.  I continue to disassemble the Scat Pack and move some of the great choices I made along with you guys over to the Widebody Hellcat.  I also go into detail on how I feel about each product and if the install caused any damage to the Scat Pack.

 

After Purchasing all the ZL1 Addons parts for the Scat Pack (Diffuser, Side Skirts, Extensions, Mag Pads), and being very pleased with them, I was hoping they would offer me a discount on my next order based on the content I’ve put out.  I always reach out to vendors I want to buy from to see if they are interested in offering me a discount.  When I contacted  ZL1 they offered me the Side Skirts, Rock Guards and Splitter guard at no charge …well for the cost of an install video.  I want to Thank ZL1 Addons for sending me these parts and helping me get my Widebody protected while my car parts budget is recovering from the hellcat down payment.

 

In this video we talk about the following products

ZL1 Addons Discount Code = WorkPlayDrive

I will be putting up Dedicated install videos for all the products mentioned above and will update the links as well

 

Stuff you Saw in this video

WorkPlayDrive Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

2015+ Challenger 2015 Challenger 2016 Challenger 2017 Challenger 2018 Challenger 2019 Challenger Challenger Hellcat Challenger SXT Challenger T/A  Challenger Scat Pack Challenger Hellcat ZL1 Addons Read Diffuser ZL1 Addons Discount Code = Workplaydrive

Challenger Hellcat No Drill Front Plate Install Sto-n-Sho

The awesome Sto-N-Sho NO DRILL license Plate mount, keeps your Hellcat legal without putting a single blemish on your front bumper.   Check out my review video from 2 years ago on the Scat Pack lower bumper version.  This one is still going strong and featured in this video.  The hellcat passed NJ State inspection at the Paramus MVC Inspection Center with my Sto-N-Sho holding my front plate.

 

At the time of this post March of 2019 there are 31 states require front plates while 19 only require 1 rear plate.  If you are lucky enough to live in one of those 19 states, this product is NOT for you …and know the rest of us are a little jealous.

 

For me, getting around this law is not an option, I left my Sto-N-Sho off once and was immediately stopped on my commute home from work.  Something to consider as well, we are putting an officer’s safety at risk, when they have to get out into traffic just to issue a warning about a law we are fully aware of.  NJ fines for a missing plate are up to $100 and for those of you that like to sport “Euro Plates” this is considered displaying fictitious numbers which carries a fine of up to $500.00

 

The Sto-N-Sho is my favorite solution after using the lower mount for almost 4 years on my Challenger Scat Pack it was only obvious, my first mod for the Hellcat was the Sto-N-Sho mount centered on the bumper.  Don’t forget to get a set of NJ legal License plate Frames to finish off the look.   I reached out to Big Mike’s Performance Parts and they were kind enough to send me this one along with a box of swag for free.  …I guess they liked my review video 😉   Special thanks to the sales team over at Big Mike’s Performance Parts for the hookup!

Note: I paid full price for my Scat Pack Sto-N-Sho

 

You can get the Sto-N-Sho at the following sites

Stuff you Saw in this video

WorkPlayDrive Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

 

2015+ Challenger 2015 Challenger 2016 Challenger 2017 Challenger 2018 Challenger 2019 Challenger Challenger Hellcat Challenger SXT Challenger T/A  Challenger Scat Pack Challenger Hellcat No Drill License Plate Mount

Restoring the Magnum’s Yellow Hazy Headlights with the 3M Headlight Restoration Kit

Another successful Headlight Restore with the 3M Headlight Restoration Kit this time on the Magnum.  After my first success with the 2005 Hyundai Tuscon,  I bought another kit for my 2005 Dodge Magnum, it was $15 on amazon and now at the time of this video it’s down to $10.  The kit included everything I needed to achieve these results in just about an hour.  The only thing I needed was my  trusty Ryobi One+ drill which I forgot to charge.  We went from hazy, cloudy, yellowed headlights to crisp bright clear lights with a little bit of effort.   The difference is huge, it’s immediately noticeable when you approach the car and provides a lot more light while driving because the light is no longer being diffused by the hazy lenses.  When I did the Hyundai, at first I tried to do it by hand sanding the lights, but this method was taking forever, after picking up the 3M Headlight Restoration Kit I was cutting through the yellow haze 10x faster with my Drill.

 

As I mentioned in this video, I highly recommend you find something to protect your freshly polished headlights from those harmful UV rays.  I didn’t want to mask off the entire car to spray a UV resistant non-yellowing clear coat like the Rust-Oleum 327864 2x Clear.   I used the more expensive, but far easier option of coating it in Chemical Guys Jet Seal and letting it set for 20 minutes.  It may be more expensive, but it’s not a single use product.  I always have Chemical Guys Jet Seal on hand, I use it every few months to coat my wheels, glass and paint.  I find it creates a nice slick surface that dirt, brake dust and bird poo does not like to stick to.  It also has desirable water beading property on the windows and windshield.

 

Note:  The 3M Headlight Restoration Kit will get your headlights clear, but you may see  imperfections deep in the plastic that you cannot get out.  Please don’t expect crystal clear new from the factory headlights, all the years of rock chips and other age related imperfections will be visible up close, but trust me your headlights will look 100x better both visually and provide more light output while driving.

 

Thanks to the Amazon Affiliate program when you buy any of the Amazon products using these links you pay the same low amazon price, and a small part of Amazon’s profit goes to help this channel.

Product used in this video 

WorkPlayDrive Recording Gear

Advanced Audio setup

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

 

 

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

 

2005 Dodge Magnum 2006 Dodge Magnum 2007 Dodge Magnum 2008 Dodge Magnum 2009 Dodge Magnum  Dodge Magnum R/T  Dodge Magnum R/T AWD  Dodge Magnum SRT Headlight restoration restore headlights with toothpaste restore headlights with off spray headlight wipes

Bye Bye to the WorkPlayDrive Scat Pack

The 2015 Scat pack is currently being returned to stock and the new car will be prepped and ready for show season!  Follow the WorkPlayDrive journey on Instagram

 

Marissa is BACK! and this time I bought the car we test drove! You can find Marissa below if you want to buy a car and be sure to tell her Mike aka WorkPlayDrive sent you so she can buy me dinner 😉

 

Marissa’s info
Marissa is currently working at Nielsen Dodge Chrysler Jeep Ram in East Hanover, NJ

 

 

Products you saw in this Video

ProClip – Dodge Challenger Left Dash Mount Item 805336 

ProClip Discount code = WorkPlayDrive

The new mount is awesome, I use Google Maps and Waze constantly for navigation and traffic, Yes I know the Car comes with Navigation on the 8.4 uConnect, but seriously, the maps are outdated, traffic is meh… and having to pay for year old updates is insane!  I’ve been using ProClip in ALL my vehicles for many years now and will continue to do so for as long as they are making mounts for my car.  I originally had the ProClip Dodge Challenger Angled Mount Item 855052. But I find the ProClip Challenger Left Dash Mount Item 805336 to me a much better solution for my Waze and Google maps needs.  If you want a ProClip of your own head over to proclipusa.com and use their wizard to properly spec the hlder for your phone with or without a case, and if you have a different car their wizard has you covered for that as well.

 

Luxe Auto Concepts – Challenger 2015+ Tail Light Fades

Luxe Discount code = WorkPlayDrive

I love the look of the Inner and Outer Fades on the challenger tail lights with a set of Tail light Centers as well Always check my latest Luxe Video for my Luxe short term Super discount.  Purchases from Luxe using my link or codes sends a small percentage of your sale to my channel, Thank you for your support!!

 

Grdian Dash Cams

Grdian Discount code = WorkPlayDrive

The Grdian Defendr+ has been my dash cam in the challenger for a few years now, Rock solid, great resolution and totally reliable.  I recently picked up the Grdian Krios mini To protect my “New to Me” 2005 Dodge Magnum.  Just so you know the Magnum was paid for by the insurance money from a hit and run.  The payment was thanks to the dash cam footage I provided to the police and insurance companies.  The Hellcat is patiently waiting for the Grdian Krios Pro to Drop any day now.  The first AFFORDABLE dual camera system, if his system is anything like their last 2 models it will be a game changer, allowing car lovers a less expensive dual camera option.  Purchases from Grdian using my codes sends a small percentage of your sale to my channel, Thank you for your support!!

 

WorkPlayDrive Recording Gear

Advanced Audio setup

(amazon affiliate links will get you to the tools I use and you pay the same low price while Amazon gives me a small bounty to help fund my videos)

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

Lit Inlet Tubes

2015+ Challenger

2015 Challenger
2016 Challenger
2017 Challenger
2018 Challenger
2019 Challenger

Challenger Hellcat
Challenger SXT
Challenger T/A
Challenger Scat Pack

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive

 

Roll your Challenger windows up or down with the keyfob remote – zAutomotive TaZer

 

NEW DISCOUNT CODE = wpdbeta244

Expires 4/25/2019

 

The folks over at zAutomotive have done it again and released the latest firmware 2.4.4i which adds a buttload of new awesome features, today we will go over the the Windows up/down from Keyfob. This will require you to be running firmware 2.4.3 or greater if you don’t want to unmarry.

 

🔴Important TaZer Videos 🔴

Tazer Playlists

Get the NEWEST Firmware Here
2.4.4i – 02/04/19 (Beta release)
NEW FEATURES

  • Added DarkMode to live features to kill all exterior lights (when not in motion)
  • Added Windows up/down from keyfob (lock 6x = up, unlock 6x or unlock unlock hold = down)
  • Fixed Aux video switching for UAS/UAQ radio, now can control front camera too.
  • Changed Full Reboot to not include ABS system, so tire size changes on Durango and GC will now work.
  • Added Drive mode memory options for Trackhawk
  • Added ForceAWD to button remap options
  • Tire size adjustment now in inches tire height.
  • Fixed PeakRPM function.
  • Bug fixes and stability improvements
  • No need to unmarry if upgrading from 2.4.3

 

 

WorkPlayDrive Recording Gear

Advanced Audio setup

(amazon affiliate links will get you to the tools I use and you pay the same low price while Amazon gives me a small bounty to help fund my videos)

Want more WorkPlayDrive APPROVED Products and Discounts!!!! 

Check out my Product Discounts page NOW

Lit Inlet Tubes

2015+ Challenger

2015 Challenger
2016 Challenger
2017 Challenger
2018 Challenger
2019 Challenger

Challenger Hellcat
Challenger SXT
Challenger T/A
Challenger Scat Pack

*~*~*~*~*~*~* Folow us *~*~*~*~*~*~*

http://www.instagram.com/workplaydrive
https://www.facebook.com/workplaydrive392/

http://twitter.com/WorkPlayDrive